Blog Posts
Front-End Performance and Geometry Optimization
This lift kit includes Pro-Ride dual-rate coil springs specifically tuned for diesel engines, ensuring a plush ride over rough terrain. Heavy-duty tubular steel radius arms correct caster and maximize ground clearance. The forged drop pitman arm and track bar relocation bracket maintain proper steering angles, reducing bump steer and improving overall drivability. Sway bar links and brake line brackets are included for a complete bolt-on solution.
Rear Suspension Components for Level Stance
To achieve a balanced stance from front to rear, the kit utilizes a high-strength fabricated steel lift block system in the rear, paired with extended u-bolts and brake line relocation brackets. You can choose between NX2 Nitro shocks for refined performance or upgrade to FOX 2.0 Performance Series shocks for aggressive off-road control.
Shock Options to Match Terrain
BDS includes vehicle-specific valved NX2 Nitro shocks as standard, engineered for smoother travel across a variety of driving surfaces. For those seeking peak suspension articulation and impact control, FOX 2.0 Performance shocks provide fade-free performance and a more responsive feel both on and off the trail.
Performance Comparison: Key Points
| Feature | BDS 5" Radius Arm Kit |
|---|---|
| Front Lift | 5" Dual Rate Coil Springs |
| Rear Lift | 3" Fabricated Steel Blocks |
| Shocks Included | NX2 Nitro or FOX 2.0 Performance |
| Installation | 100% Bolt-On |
| Tire Fitment | Up to 37 x 12.50 |
| Radius Arms | Heavy-Duty Tubular Steel |
Key Features
- Easy, 100% bolt-on installation
- Pro-Ride dual rate coil springs for enhanced comfort and articulation
- Heavy-duty tubular radius arms correct caster and boost clearance
- Track bar relocation bracket and drop pitman arm ensure accurate steering geometry
- Fabricated steel rear blocks provide a level stance
- NX2 Nitro shocks or upgrade to FOX 2.0 Performance shocks
Fitment Table
| Years | Make | Model | Drive | Engine |
|---|---|---|---|---|
| 2023–2024 | Ford | F-250 Super Duty | 4WD | Diesel |
| 2023–2024 | Ford | F-350 Super Duty | 4WD | Diesel |
Quick Specs
- Front Lift Method: Coil Spring
- Rear Lift Method: Block
- Front Lift Height: 5"
- Rear Lift Height: 3"
- Shocks Included: Yes (NX2 or FOX)
- Part Number: BDS2203FS/2203H
Important Notes
- Wheel Fitment: 37 x 12.5 with 17x9, 18x9, or 20x9 and 5" backspace
- Not compatible with trucks using radius arm-mounted ride height sensors
- Pitman arm nut should be replaced after each removal
- Use a small puller to remove drag link joint and steering stabilizer taper
- Carrier bearing drop kit (BDS123402) may be required for 2-piece driveshafts
- Tremor models will have different net lift due to higher factory stance
- Stock wheels may interfere with brake lines and suspension components
- Some trimming may be necessary for 37" tires on aggressive wheel setups
- Torque wrench rated for 406 ft-lbs required
- Trucks without top-mounted overload springs will require (4) UBT4028
- California Residents: PROP 65 WARNING – Cancer and Reproductive Harm
Refined Ride, Rugged Capability
The BDS 5-Inch Radius Arm Lift Kit delivers a blend of comfort, control, and clearance that transforms your Super Duty into a commanding force—on-road or off. Built for strength and backed by precision engineering, this kit is a powerhouse upgrade for serious diesel truck owners.
LiftKits4Less.com: Your One-Stop Online Shop for High-Qality Suspension Lift Kits
