Blog Posts
Engineered for the Twin Traction Beam (TTB) Front Suspension
The TTB front axle system, introduced in 1980, revolutionized Ford's suspension by using dual pivot-mounted beams for increased independence and articulation. But lifting a TTB-equipped truck requires thoughtful geometry correction—something the Superlift K561 system handles with precision. The kit addresses both camber and caster angle changes that result from the lift with heavy-duty axle pivot brackets and extended Superunner radius arms.
Heavy-Duty Components for On and Off-Road Strength
The K561 kit includes a pair of 0.25-inch steel plate axle pivot brackets that correct camber. For caster correction, extended Superunner radius arms are provided, offering 18 inches of extra length over stock for superior wheel travel and reduced suspension bind. Drop pitman arms and sway bar relocation brackets are included to keep steering and sway geometry tight and consistent.
Improved Rear Stance and Ride Balance
To maintain a level profile and support load-bearing capability, the rear of the truck is lifted with 2.5-inch cast steel blocks and new U-bolts. This upgrade complements the front lift, resulting in a balanced and trail-ready ride that’s also highway capable.
Superlift Shocks Included
Four Superlift hydraulic shocks are included, designed with 10-stage velocity-sensitive valving for optimal control across a range of speeds and surfaces. These shocks self-adjust based on terrain, offering a smooth ride without sacrificing control or durability. If your truck is factory-equipped with auxiliary front shocks, order two additional Superide #87380 shocks for full compatibility.
Fitment
| Years | Drive | Make | Model |
|---|---|---|---|
| 1980–1996 | 4WD | Ford | F-150 |
Features
- 6-inch front lift with heavy-duty coil springs and pivot brackets
- Extended Superunner radius arms for caster correction
- Drop pitman arm included to correct steering linkage angles
- Front sway bar relocation brackets improve articulation
- 4-inch rear lift block kit with cast steel blocks and hardware
- Four Superlift hydraulic shocks with velocity-sensitive valving
Components
- Front: Coil springs, drop axle pivot brackets, extended Superunner radius arms, radius arm bushings, drop pitman arm, Superlift shocks, sway bar relocation brackets
- Rear: 2.5-inch cast steel lift blocks, U-bolts, heavy-duty washers and nuts, Superlift shocks
Important Notes
- Installation Time: Approximately 8 hours
- Difficulty Level: 3 of 5
- Optional: Extended brake hoses recommended for max articulation
- Optional: Superunner Steering System upgrade recommended for best steering performance
- For trucks with factory dual front shocks, order two additional #87380 Superide shocks
- Warning: Contains materials known to the State of California to cause cancer and reproductive harm
Summary
The Superlift K561 6-Inch Lift Kit is the complete solution for lifting your 1980–1996 Ford F-150 4WD with Twin Traction Beam suspension. With precision-engineered geometry correction, extended radius arms, durable coil springs, and four Superlift shocks, this kit is built for off-road performance and on-road drivability. Whether you're restoring a classic or preparing your F-150 for trail duty, this lift kit delivers the stance and performance you demand.
LiftKits4Less.com: Your One-Stop Online Shop for High-Qality Suspension Lift Kits
