Blog Posts
Durable Coil Springs with 2-Door and 4-Door Specific Tuning
This system includes premium Zone Offroad coil springs designed to give a true 3-inch lift while preserving factory-style ride quality. Unlike generic kits, these springs are tailored for 2-door and 4-door JK Wranglers, ensuring proper handling and support. Whether you're hitting the rocks or the road, you’ll notice the difference in controlled articulation and responsive rebound.
Enhanced Sway Bar Links and Axle Alignment
Extended rear sway bar links come with durable urethane bushings to reduce body roll and improve stability. Zone uses the factory rear links up front for proper geometry. A rear track bar relocation system is included to perfectly recenter the axle under the Jeep after lifting, maintaining alignment and reducing uneven wear.
Maximized Suspension Travel and Protection
To safely increase suspension travel, 2-inch bump stop extensions are added—protecting your shocks and components during full compression. Brake line relocation brackets are also supplied, allowing your lines to travel safely with the increased wheel articulation.
Precision-Tuned Zone Shocks with Boot Covers
Zone front and rear shocks are included and valved specifically for the JK chassis. These gas-charged shocks offer consistent damping and better heat dissipation under load. Shock boot covers are also included to protect the piston rods from debris and rock damage on harsh terrain.
Right-Hand Drive Compatibility
This kit has been approved for use on right-hand drive (RHD) vehicles. However, certain installation variations may be necessary. Refer to the official instructions and pay attention to any notes specific to RHD configurations.
Fitment Guide
| Years | Make | Model | Drive | Engine |
|---|---|---|---|---|
| 2007–2018 | Jeep | Wrangler 2-Door (JK) | 4WD | Gas |
| 2007–2018 | Jeep | Wrangler 4-Door (JK) | 4WD | Gas |
Included Components
- Front and rear 3” coil springs (2-door and 4-door specific)
- Rear extended sway bar links with urethane bushings
- Rear track bar relocation bracket
- 2” bump stop extensions (front and rear)
- Brake line relocation brackets
- Zone front and rear performance-tuned shocks
- Shock boot covers
Quick Specs
| Spec | Detail |
|---|---|
| Front Lift Height | 3" |
| Rear Lift Height | 3" |
| Lift Method | Coil Springs |
| Install Time | 4–5 Hours |
| Difficulty Level (1–5) | 2 |
| Recommended Wheel Size | 16 x 8 |
| Backspacing | 4.5" |
| Max Tire Size | 35" x 12.50" |
| Part Number | J12N / J13N |
Important Installation Notes
- Fits both 2-door and 4-door Jeep JK models
- Compatible with Rubicon models
- Factory wheels cannot be re-installed due to rear sway bar link interference
- Coil springs are 2-door and 4-door specific—choose correct application
- 2012–2017 models using stock front driveshaft require exhaust extension kit J5305
- Optional front alignment cam locks recommended when using stock-length control arms
LiftKits4Less.com: Your One-Stop Online Shop for High-Quality Suspension Lift Kits
